Lucent Technologies 3000 Carrying Case User Manual


 
Important Safety Instructions
vi Issue 1 October 1998
Use only Lucent Technologies-manufactured DEFINITY
Enterprise
Communications Server (ECS) circuit packs, carrier assemblies, and
power units in the DEFINITY
ECS control unit.
Use only Lucent Technologies-recommended/approved DEFINITY
ECS accessories.
Do not install this product near water, for example, in a wet basement
location.
Do not overload wall outlets, as this can result in the risk of fire or
electrical shock.
Do not attach the power supply cord to building surfaces. Do not allow
anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
Unplug the product from the wall outlet before cleaning. Use a damp
cloth for cleaning. Do not use cleaners or aerosol cleaners.
Do not operate the system if chemical gas leakage is suspected in the
area. Use telephones located in some other safe area to report the trouble.
WARNING:
DO NOT open the Rack Power Supply. There are no user
serviceable parts inside the unit. Only an authorized
technician should open the unit for required maintenance
or upgrading purposes.
SAVE THESE INSTRUCTIONS