Lucent Technologies 3000 Carrying Case User Manual


 
Configuration
5-4 Issue 1 October 1998
Configuration Steps continued
8. Assign User Groups to Switch Cards. Select the Hardware tab on the
left and then the Passwords tab in the center of the screen. Assign User
Groups to cards. (see page 5-24 for more information)
9. Upload the User Groups to Switch Cards. This can be done individually,
but it may be easier to do all the cards at once. Click on the Passwords
icon and follow the instructions. (see page 5-26 for more information)
10. Once the passwords are uploaded, always Save and Print the passwords
for future reference. Keep the printed list in a secure location away from
the Rack.
11. Make sure the Remote Module is configured. See steps below for
information.
How to Configure the Remote Module
1. The Model 1101 Remote Module must be configured with the PBX dial
phone number (i.e. the phone number of the PSTN line connected to the
Switch Card). To use the COD or Dialback features, program the REM
(remote) phone number along with the appropriate COD or Dialback
options.
Note: See the Model 1101 Manual for details on configuring the remote
module.