Lucent Technologies 3000 Carrying Case User Manual


 
Troubleshooting
6-18 Issue 1 October 1998
Error Codes continued
Error Codes
Error
Code
Description Cause
125B Number of fatal errors that caused unit
to restart (caused by errors 124C, 118C,
and 120B).
126C Invalid Length of SCC Tx packet
127B SCC Transmit Busy
128A SCC Rx Status Error DTE equipment is sending
data at the wrong baud rate.
129A SCC Tx Status Error
130A Invalid Voice Packet ID detected
131A Number of times all user data buffers
were in use
132A Number of times user data packet too
long
133A Number of times all signalling buffers
were in use
134A Number of times signalling packet too
long
135A Bad frame checksum (FCS). Related to
poor analog line conditions.
Poor analog line. There may
be hits on the line.
136A Serial transmit buffers overflow to
modem
137A Serial receive buffers overflow to
modem.
138B V42 RX Timeout - Modem Retrain Modem had to re-train
(reconnect), possible power
outage on Switch Card.
Table 6-12. Error Codes 125B to 138B