Filter
Top Products
2-2 NEC MH150/MH160 Mobile Handset Overview
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
Quick Network List
Step 1 A wireless LAN must be properly configured and operational through the
use of 802.11 wireless APs.
Step 2 TFTP server must be available on the network in order to load the
appropriate software onto the handset. See“Software License and
Protocol Management” on page 4-1 for detailed instructions for loading
software on handsets.
Step 3 The supported NEC UNIVEGE PBX system components must be
connected to your network and completely operational.
Step 4 The WLAN Voice Gateway, which facilitates the QoS on the wireless
LAN for the handsets, must be on the same subnet as the handsets and
have the proper versions of software.
—Ensure you have the following versions
for the WLAN Voice Gateway:
173
svp100.toc
174 zvmlinux
175 flashfs
Step 5 Install the correct handset software per “Configuration Process” on
page 4-2.
Step 6 Install any updates to the WLAN Voice Gateway software per WLAN
Voice Gateway Administration Guide for SIP, Chapter 5 Software
Maintenance. Ensure the software is properly loaded on the TFTP
server.
Step 7 Configure your handset to ensure that it is associated with the wireless
LAN, has the appropriate software, and has the correct IP address for
the supported PBX. See “Software License and Protocol Management”
on page 4-1and “NEC MH150/MH160 Wireless Handset Configuration”
on page 3-1 for detailed instructions for loading software onto and
configuring handsets.
Step 8 Create configuration files on the SIP TFTP server to define parameters
for the SIP application. See “SIP TFTP Server Configuration Files” on
page 6-1.