Filter
Top Products
7-2 Using the MH150/MH160 Mobile Handset
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
The called party name for internal calls is similarly determined. If the
name is configured, it will display, if the name is not configured, the
extension will display. The first 18 characters are displayed.
Calls originating outside the system display just as they do on wired sets
but
only the first 18 characters display.
System icons
Table 7-1 System icons
Indicator Function
The signal-strength icon indicates the strength of the signal and can assist the user in determining if the handset
is moving out-of-range.
The voicemail icon is activated when a new voicemail message is received if the feature is supported by the
phone emulation.
The battery icon indicates the amount of charge remaining in the Battery Pack. When only one level remains,
the Battery Pack needs to be charged.
The speakerphone icon displays when the speakerphone is active.
Up and down arrows are displayed when the menu has additional options above or below.
Left or right arrows are displayed during editing when the cursor may be moved left or right.
The Push-to-talk (PTT) ring icon. A PTT call is coming in.
The priority PTT ring icon. A call is coming in on the priority PTT channel. This call will override any other.
Location Service icon: indicates the Ekahau Real-Time Location System (RTLS) is enabled.
Locked
Locked indicates that the keypad is locked to prevent accidental activation. Use the Unlk softkey plus the # key
to unlock it.
[No Service
message]
If warning tones are not disabled, an alarm will sound and a descriptive message displays when the handset
cannot receive or place calls. You may be outside of the covered area. Walk back into the covered area. The in-
service tone indicates service is reestablished.
The download icon indicates that the handset is downloading code. This icon only appears while the handset is
running the over-the-air downloader. It appears to the right of the Signal Strength icon in the same location as
the Voicemail icon.
XXXX During character entry, Indicates current data entry symbol mode.