Filter
Top Products
9-1
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
9
Diagnostic Tools
Run Site Survey, Diagnostics Enabled, and Syslog Mode are three
diagnostic tools provided to assist the wireless LAN administrator in
evaluating the functioning of the NEC MH150/MH160 Mobile Handsets
and the system surrounding it. Diagnostic Tools are enabled in the
Admin menu.
Run Site Survey
Site survey is used to evaluate the facility coverage before certifying
that an installation is complete. It can also be used at any time to
evaluate coverage by testing signal strength, to gain information about
an AP, and to scan an area to look for all APs regardless of SSID. The
information available through the site survey includes:
•SSID
•Beacon Interval
• Information regarding support of 802.11d, 802.11g, 802.11h and
other 802.11
amendment standards as required
• Current security configuration
Start the site survey by selecting Run Site Survey
from the Admin
menu. The mode starts immediately.
When the test is started, it is by default
in “single SSID” mode. When
the Any soft key is pressed (softkey A) all APs, regardless of SSID, are
displayed and the softkey changes to say MyID. Pressing the MyID soft
key will revert to the “single SSID” mode and change the softkey back
to Any.
The display would look like the following for the multiple AP mode.
Figure 9-1
Multiple AP mode display
1 1 1 1 1 1 - 2 2 3 3 4 4 4
1 1 1 1 1 1 - 2 2 3 3 4 4 4
1 1 1 1 1 1 - 2 2 3 3 4 4 4
1 1 1 1 1 1 - 2 2 3 3 4 4 4
A n y D e t 1