Filter
Top Products
NEC MH150/MH160 Wireless Handset Configuration 3-19
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
Admin Menu Default Table
When the Restore Defaults option is selected, administrative
parameters will be reset to their factory defaults as shown in
Table 3-3.
The Telephony Protocol setting will not change. User parameters will
be reset per
Table 3-4 on page 3-20.
Table 3-3 Admin Menu default table
Menu Option Setting Sub-option Sub-sub-option Default
Phone Config
Push-to-Talk Disabled
Allowed Channels [all]
Name Channels [None set]
Priority Channel Disabled
Time Zone GMT
Daylight Saving DST No Adjust
Password Enabled
Change Password [n/a]
SIP Registration [None set]
Clear Regist [n/a]
OAI Enabled
Location Service
RTLS Disabled
Transmit interval 10 minutes
Location Server IP [None set]
ELP Port 8552
Network Config
IP Addresses Use DHCP
SSID* [None set]
WLAN Settings Custom/Security None
WEP Key Length 40-bit
Custom/QoS Mode SVP
DSCP tags WT in call =46
WT standby =40
Other =0
Reg. Domain* [None set]
802.11 mode b & b/g mixed
Transmit Power 30 mW (15 dBm)