Filter
Top Products
3-2 NEC MH150/MH160 Wireless Handset Configuration
NEC MH150/MH160 Mobile Handset Administration Guide - Revision 2
The Admin Menu
The Admin menu contains configuration options that are stored locally
(on each handset). Each handset is independent, and if the default
settings are not desired, the Admin options must be set in each handset
requiring different settings.
Opening the Admin menu
Step 1 With the handset powered off, press and hold the START key. While
holding the START key, press and release the END key.
Step 2 When the Admin menu appears, release the START key.
If an admin password has been set, the display will require its entry before opening
the Admin menu. The default password is 123456. If no password is set, the display
will proceed directly into the Admin menu.
Navigation
The navigation keys just below the softkeys are used to navigate
through and select menu options. These are referred to as Nav
▲,
Nav▼, Nav◄, Nav►, and NavOK.
Figure 3-1
Navigation keys
Toggle options
Some menu items have only two options, which operate on a toggle
basis. The current setting is shown below the menu heading on the info
line. The other available setting is highlighted in the menu list. Press
NavOK to activate the highlighted setting.
For example, when predial is disabled, the info line displays P
redial
Disabled and the highlighted menu item is the Enable Predial option.
Press NavOK to enable predial. The info line will change to display
Predial Enabled.
NOTE