Filter
Top Products
To select whether net calls alert or not, select Call > Internet
call alert. You are notified of missed net calls with a
notification.
To set the default call type, select Call > Default call type
and select Voice call if you make a GSM calls, or Internet
call if you make net calls.
To send a text message automatically to the person who is
calling you informing why you cannot answer the incoming
call, select Call > Reject call with SMS > Yes. To set the text
for the message, select Call > Message text.
Network settings
Select Menu > Tools > Settings > Phone > Network.
To select the network mode, select Network mode and Dual
mode, UMTS, or GSM. In the dual mode, the device switches
automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and reduce the
battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode may cause constant
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select Operator selection and
Manual to choose from available networks, or Automatic to
have the device select the network automatically.
To set the device to indicate when it is used in Micro Cellular
Network (MCN), select Cell info display > On.
Connection settings
Select Menu > Tools > Settings > Connection.
Select from the following:
• Bluetooth — Edit the Bluetooth settings.
See "Send and
receive data with Bluetooth", p. 94.
• USB — Edit the data cable settings.
See "Data
cable", p. 92.
• Access points — Set up new or edit existing access points.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
• Packet data — Determine when packet data connections
are used, and enter the access point if you use your device
as a modem for a computer.
• Wireless LAN — Determine if the device displays an
indicator when a WLAN is available, and how often the
device searches for networks.
• SIP settings — View or create session initiation protocol
(SIP) profiles.
• Internet tel. — Define settings for net calls.
• Configurations — View and delete trusted servers from
which your device may receive configuration settings.
• APN control — Restrict packet data connections.
See
"Restrict packet data", p. 121.
Access points
Select Menu > Tools > Settings > Connection > Access
points.
© 2007 Nokia. All rights reserved.116