Filter
Top Products
Camera and Gallery
34
Shortcuts are as follows:
•Press 1 to activate or deactivate the night mode.
•Press 3 to adjust brightness.
•Press 6 to adjust contrast.
To make lighting and color adjustments before taking a
picture, select Options > Adjust > Brightness, Contrast,
White balance, or Color tone. See "Adjust color and
lighting," p. 32.
Press the middle of the scroll key to start recording. The
record icon is shown.
If you use the camera to record a
video clip, the LED flash is constantly on in low power mode
indicating that a video clip is being recorded.
To pause recording at any time, press the middle of the
scroll key. The pause icon starts to blink on the display.
Press the scroll key again to resume recording.
Video recording automatically stops if recording is set to
pause, and there are no key presses within a minute.
Select Stop to stop recording. The video clip is
automatically saved to the Video clips folder of Gallery.
See "Gallery," p. 35.
Options for a recorded video clip
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, press clear.
• To return to the viewfinder to record a new video, press
the middle of the scroll key.
• To send the video Via multimedia or via Bluetooth, press
the call key. For more information, see "Messaging," p.
41 and "Bluetooth connection," p. 79.
Adjust video recorder settings
Select Options > Settings > Video and the setting you
want to change:
Length—If you select Maximum, the length of the video
recording is restricted by the available space on your
memory card, and up to one hour per clip. You cannot send
a video clip recorded like this by MMS, due to the recording
properties. Select Short to record video clips up to 300 KB
(approximately 30 seconds in duration) so that they can be
conveniently sent as a multimedia message to a
compatible device. Some networks, however, may only
support sending multimedia messages with a maximum
size of 100 KB.
Video resolution—Select 128x96 or 176x144.
Default video name—Define a default name, or select
the date.
Memory in use—Define the default memory store, phone
memory, or memory card.