Nokia 6682 Cell Phone User Manual


 
Connectivity
85
Synchronize data
In the Sync main view, you can see the different
synchronization profiles and the kind of data to
be synchronized.
1 Select a synchronization profile and Options >
Synchronize. The status of the synchronization is shown
at the bottom of the screen.
To cancel synchronization before it finishes,
select Cancel.
2 You are notified when the synchronization is complete.
After synchronization is complete, select Options >
View log to open a log file showing the synchronization
status (Complete or Incomplete) and how many
calendar or contact entries have been added, updated,
deleted, or discarded (not synchronized) in the phone or
on the server.
Device manager
Select Menu > Connect. > Dev. mgr. You may receive
server profiles and different configuration settings from
your network operator, service provider, or company
information management department. These configuration
settings may include access point settings for data
connections and other settings used by different
applications in your phone.
To connect to a server and receive configuration settings
for your phone, select Options > Start configuration.
To allow or deny receiving of configuration settings from
a service provider, select Options > Enable config. or
Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your phone
to the server.
Session mode—Select Bluetooth or Web.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name
and password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want the phone to ask for
confirmation before accepting a configuration from the
server, select No.