Filter
Top Products
Tools
87
Right selection key—To assign a shortcut to the right
selection key in the standby mode, select an application
from the list.
To assign keypad shortcuts for the different presses of the
scroll key, select an application from the list. The scroll key
shortcuts are not available if the active standby is on.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if you
want the operator logo to show or not.
Display
Brightness—You can change
the brightness of the display
to lighter or darker. The
brightness of the display is
automatically adjusted
according to the
environment.
Screen saver timeout—
The screen saver is activated
when the timeout period
is over.
Light time-out—Select a timeout after which the backlight
is dimmed. The backlight will switch off approximately 30
seconds after dimming.
Call settings
Send my caller ID (network service)—You can set your
phone number to be displayed to (Yes) or hidden from (No)
the person whom you are calling, or the value may be set
by the network operator or service provider when you
make a subscription (Set by network).
Call waiting (network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or Check
status to check if the function is active or not.
Reject call with SMS—Select Yes to send a text message to
a caller informing why you could not answer the call. See
"Answer or reject a call," p. 18.
Message text—Write a text to be sent in a text message
when you reject a call.
Tip! To change the settings for call diverting,
select Menu > Tools > Settings > Call
forwarding. See "Call forwarding," p. 94.
Automatic redial—Select On, and the phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing
press the end key.