Filter
Top Products
Tools
88
Summary after call—Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
1-touch dialing—Select On, and to dial the numbers
assigned to the speed dialing keys (2–9), press and
holding the key. See also "1-touch dialing," p. 19.
Anykey answer—Select On, and to answer an incoming
call, briefly press any key, except the left and right
selection keys, the power key, and the end key.
Line in use (network service)—This setting is shown only
if the SIM card supports two subscriber numbers; that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, 2 is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold # in the standby mode.
Line change (network service)—To prevent line selection,
select Line change > Disable if supported by the SIM
card. To change this setting, you need the PIN2 code.
Connection settings
Data connections and access points
Your phone supports packet data connections ( ), such as
general packet radio service (GPRS) in the GSM network.
GPRS uses packet data technology where information is
sent in short packets of data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the kind of an access point you need with your
service provider for the service you wish to access. For
availability and subscription to packet data connection
services, contact your network operator or service provider.