Filter
Top Products
Phone Settings
Settings
46
6. Select one of the following settings, then press the Key.
Phone Only — Allows you to edit the lock code for Security. (The default lock code is the last 4 digits of your mobile
number.)
Calls & Services — Allows you to edit the lock code for Restrictions. (The default lock code is the last 4 digits of your
mobile number.)
7. If Phone Only is selected, enter the new four-digit code in the Enter New Code: field. Enter the new four-digit code
again in the Re-enter New Code: field to confirm your input, then press the Key.
8. If Calls & Services is selected, enter the current lock code in the Enter Current Code: field. Enter the new four-digit code
in the Enter New Code: field. Enter the new four-digit code again in the Re-enter New Code: field, then press the
Key.
Restrictions
Use the following procedure to configure Location Setting, Calls and Messages restrictions.
1. Swivel open the phone to reveal the full QWERTY keypad.
2. From Idle Mode, press the Key (MENU), and press Settings & Tools.
3. Press Phone Settings, and press Security.
4. Enter the four-digit lock code, then press the Key. The default lock code is the last 4 digits of your mobile number.
5. Press Restrictions.
6. Enter the four-digit lock code again, then press the Key.
7. Select one of the following settings:
Location Setting — Unlock Setting or Lock Setting.
Calls — Incoming Calls or Outgoing Calls.
• For Incoming Calls, set Allow All, Contacts Only or Block All.
• For Outgoing Calls, set Allow All, Contacts Only or Block All.
Messages — Incoming Messages or Outgoing Messages.
•For Incoming Messages, set Allow All or Block All.
• For Outgoing Messages, set Allow All or Block All.
Dial-Up Modem — Allow or Block.
8. Press the Key.
Phone Lock Setting
This setting specifies whether the phone should be locked whenever it is turned on. Lock Mode prevents the unauthorized
use of your phone. Once the phone is locked, it is in restricted mode until the lock code is entered. You can still make
emergency calls.
1. Swivel open the phone to reveal the full QWERTY keypad.
2. From Idle Mode, press the Key (MENU), and press Settings & Tools.
3. Press Phone Settings, and press Security.
4. Enter the four-digit lock code, then press the Key. The default lock code is the last 4 digits of your mobile number.
5. Press Phone Lock Setting.
6. Select one of the following settings, then press the Key.
Unlocked — Phone is unlocked.
On Power Up — Phone will lock when it is turned on.
Lock Phone Now
Lock the phone now.
1. Swivel open the phone to reveal the full QWERTY keypad.
2. From Idle Mode, press the Key (MENU), and press Settings & Tools.
3. Press Phone Settings, and press Security.
4. Enter the four-digit lock code, then press the Key. The default lock code is the last 4 digits of your mobile number.