Filter
Top Products
To set the keypad to lock automatically
after a defined period, select Phone
and SIM card > Keypad autolock
period.
To set a time-out period after which the
device is automatically locked and can
be used only if the correct lock code is
entered, select Phone and SIM card >
Phone autolock period. Enter the
length of the time-out period in
minutes, or select None to deactiveate
the autolock feature. When the device is
locked, you can still answer incoming
calls, and calls may still be possible to
the official emergency number
programmed into your device.
To change the lock code, select Phone
and SIM card > Lock code. The default
lock code is 12345. Enter the current
code and then the new code twice. The
new code must be 4-255 characters
long. Alphanumeric (uppercase and
lowercase) characters can be used. The
device notifies you if the lock code is not
properly formatted.
Restore original settings
To restore the original device settings,
select Menu > Ctrl. panel > Settings
and General > Factory settings. To do
this, you need your device lock code.
After resetting, the device may take a
longer time to switch on. Documents,
contact information, calendar entries,
and files are unaffected.
Positioning settings
Select Menu > Ctrl. panel > Settings
and General > Positioning.
To use a specific positioning method to
detect the location of your device, select
Positioning methods.
To select a positioning server, select
Positioning server.
To select which measurement system
you want to use for speeds and
distances, select Notation
preferences > Measurement system.
To define in which format the
coordinate information is displayed in
your device, select Notation
preferences > Coordinate format.
148 Settings
© 2010 Nokia. All rights reserved.