Filter
Top Products
To select the network mode, select
Network mode and Dual mode,
UMTS, or GSM. In dual mode, the device
switches automatically between
networks.
Tip: Selecting UMTS enables faster data
transfer, but may increase the demand
on battery power and reduce the
battery life. In regions close to both GSM
and UMTS networks, selecting Dual
mode may cause constant jumping
between the two networks, which also
increases the demand on battery
power.
To select the operator, select Operator
selection and Manual to select from
available networks, or Automatic to set
the device to select the network
automatically.
To set the device to indicate when it is
used in a microcellular network (MCN),
select Cell info display > On.
Connection settings
Select Menu > Ctrl. panel > Settings
and Connection.
Select from the following:
Bluetooth — Edit the Bluetooth
settings.
USB — Edit the data cable settings.
Destinations — Set up new or edit
existing access points. Some or all
access points may be preset for your
device by your service provider, and you
may not be able to create, edit, or
remove them.
VPN — Manage the settings for virtual
private networking.
Packet data — Define when packet
data network is attached, and enter the
default packet switched access point
name if you use your device as a modem
for a computer.
Wireless LAN — Set the device to
display an indicator when a wireless
LAN (WLAN) is available, and define how
often the device searches for networks.
Video sharing — Enable video sharing,
select the SIP profile for video sharing,
and define the video saving settings.
SIP settings — View or create session
initiation protocol (SIP) profiles.
XDM profile — Create an XDM profile.
The XDM profile is required for many
150 Settings
© 2010 Nokia. All rights reserved.