Filter
Top Products
You can view the EAP plug-ins currently
installed in your device (network
service).
EAP plug-ins
1 To define the EAP plug-in settings,
select Options > New access
point, and define an access point
that uses WLAN as a data bearer.
2 Select 802.1x or WPA/WPA2 as the
security mode.
3 Select WLAN security settings >
WPA/WPA2 > EAP > EAP plug-in
settings.
Use EAP plug-ins
To use an EAP plug-in when you connect
to a WLAN using the access point, select
the desired plug-in and Options >
Enable. The EAP plug-ins enabled for
use with this access point have a check
mark next to them. To not use a plug-in,
select Options > Disable.
To edit the EAP plug-in settings, select
Options > Edit.
To change the priority of the EAP plug-
in settings, select Options > Raise
priority to attempt to use the plug-in
before other plug-ins when connecting
to the network with the access point, or
Options > Lower priority to use this
plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more
information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu > Ctrl. panel > Settings
and Connection > SIP settings.
The session initiation protocol (SIP) is
used for creating, modifying, and
terminating certain types of
communication sessions with one or
more participants (network service). SIP
profiles include settings for these
sessions. The SIP profile used by default
for a communication session is
underlined.
To create a SIP profile, select Options >
New SIP profile > Use default profile
or Use existing profile.
Settings 159
© 2010 Nokia. All rights reserved.