Filter
Top Products
Tools
120
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network,
that is, the network service provider whose SIM card is in
your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one network service provider to use
the services of other network service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
In the standby mode, indicates a compatible headset
is connected, and that the headset is unavailable, or
Bluetooth connectivity to a headset is lost. indicates
a compatible loopset is connected.
Select Headset, Loopset, Bluetooth handsfree, or Car
kit, and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 102.
Automatic answer—Set whether you want the device to
answer an incoming call automatically after 5 seconds. If
the ringing type is set to Beep once or Silent, automatic
answer is disabled.
Lights (for car kit only)—Set whether lights remain on, or
are switched off after the time-out.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 60.
To activate enhanced voice commands for starting
appications, press , and select Tools > Voice cm.; the
device creates voice tags for the applications. To add more
applications to the list, select Voice cm. > Options > New
application. To activate and create voice tags for profiles,
open the Profiles folder in Voice cm.
To use enhanced voice commands, press and hold in
the standby mode, and say a voice command. The voice
command is the name of the application or profile
displayed in the list.