Filter
Top Products
My own
79
be used in other compatible applications and transferred
between compatible devices.
Trip meter
Scroll to Trip distance, and press . Select Options >
Start to activate trip distance calculation, and Stop to
deactivate it. The calculated values remain on the display.
Select Reset to set the trip distance and time, and average
and maximum speeds to zero, and to start a new
calculation. Select Restart to also set the odometer and
total time to zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
3-D tones
Press , and select My own > 3-D tones. With 3-D
tones you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select Ringing
tone and the desired tones.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed—Scroll left or right to adjust the speed
at which sound moves from one direction to another. This
setting is not available for all ringing tones.
Doppler effect—Select On to have the ringing tone sound
higher when you are closer to your device, and lower when
you are farther away. When you get closer to the device,
the ringing tone appears to become higher, and lower
when you move away from it. This setting is not available
for all ringing tones and sound trajectories.
Reverberation—Select the type of echo.
To listen to the ringing tone with the 3–D effect, select
Options > Play tone.
If you enable the 3-D tones but do not select any 3-D
effect, stereo widening is applied to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing volume.
Nokia Lifeblog
Nokia Lifeblog is a combination of software for mobile
phone and PC that keeps a multimedia diary of the items