Filter
Top Products
Connectivity
88
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 48.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
1 Select a synchronization profile and Options >
Synchronise. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is
complete. Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Create a new synchronization profile
To create a new profile in addition to existing ones, select
Options > New sync profile. Choose whether you want to
use the default setting values or copy the values from an
existing profile.
Define the following:
Sync profile name—Enter a name for the profile.
Applications—Select the applications to synchronize with
this profile, for example, Contacts and Calendar. Scroll to
each application, and press the scroll key to define its
synchronization settings:
• Include in sync—Select Yes if you want to synchronize
the application.
• Remote database—Enter a correct path to the remote
calendar, address book, or database on the server.
• Synchronisation type—Select Normal (two-way
synchronization), To server only, or To phone only.
Connection settings—Define the following. Contact your
service provider or system administrator for the correct
values.
• Server version—Select the synchronization protocol
version to use with the server.
• Server ID—Enter the server ID (shown only if Server
version is set to 1.2).
• Data bearer—Select the connection type: Internet or
Bluetooth.
• Access point (shown only if Data bearer is set to
Internet)—Select an access point to use for the data
connection.
• Host address—Enter the IP address of the remote
database server.
• Port—Enter the server port number (shown only if Data
bearer is set to Internet).