Filter
Top Products
Connectivity
92
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Wireless LAN
The available wireless LAN view shows a list of wireless
LANs within range, their network mode (Infrastructure or
Ad-hoc), and signal strength indicator. is shown for
networks with encryption, and if your device has an
active connection in the network.
To view the details of a network, select Options > Details.
To create an internet access point in a network, select
Options > Define access point.
Device manager
Software updates
You may view and update the current software version of
your device, and check the date of a possible previous
update (network service). This feature only works in the
Fold open mode.
In the Fold open mode, press and select Connect. >
Device mgr..
To check whether software updates are available, select
Options > Check for updates. Select an internet access
point when asked.
If an update is available, information about it is displayed.
Select Accept to accept to download the update or Cancel
to cancel the download. The download may take several
minutes. You can use your device during the download.
Downloading software updates may involve the
transmission of large amounts of data through your service
provider's network. Contact your service provider for
information about data transmission charges.
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to backup data before accepting the
installation of an update.
When the download is complete, select Yes and then
Accept to install the update, or No to install it later by
using Options >Install update. The installation may take
several minutes.
The device updates the software and restarts. To complete
the update, select OK. When asked, select an internet
access point. Your device sends the software update status
to the server.