Filter
Top Products
Copyright © 2007 Nokia. All rights reserved.
Settings
100
Standby mode
Active standby — Use shortcuts to applications in the
standby mode. See "Active standby mode", on page 64.
Active standby apps. — Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
Shortcuts > Left selection key and Right selection key —
Assign a shortcut to the selection keys in the standby
mode.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo — This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Language
Phone language — Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language — Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text — Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Enhancement
For enhancement indicators, see "Essential indicators", on
page 3. Some enhancement connectors do not indicate
which type of an enhancement is connected to the device.
The available settings depend on the type of enhancement.
Select an enhancement and from the following:
Default profile — Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See "Profiles — set tones", on page 61.
Automatic answer — Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled.
Lights — Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.