Filter
Top Products
Copyright © 2007 Nokia. All rights reserved.
Camera
47
You in the picture — self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select Self timer > 2 seconds, 10
seconds, or 20 seconds. To activate the self-timer, select
Activate. The quadrangle blinks and the device beeps
when the timer is running. The camera takes the picture
after the selected delay elapses.
To switch off Self timer, in the active toolbar, select Self
timer > Off.
Tip! In the active toolbar, select Self timer > 2
seconds to keep your hand steady when taking a
picture.
Record videos
1 To activate the main camera, open the lens cover. If the
camera is in the Image mode, select Video mode from
the active toolbar.
2 Press the capture key to start recording. In the portrait
mode, use the scroll key for recording. The red record
icon is shown and a tone sounds, indicating that
recording has started.
3 Select Stop to stop recording. The video clip is
automatically saved to the Images & vids. folder of
Gallery. See "Gallery", on page 50. The maximum
length of the video is 60 minutes (if enough memory
available).
To pause recording at any time, press Pause. The pause
icon ( ) blinks on the display. Video recording
automatically stops if recording is set to pause and there
are no keypresses within a minute. Press Continue to
resume recording.
To zoom in or out of the subject, press the zoom key on the
side of the device.
To make lighting and color adjustments before recording a
video, use the scroll key to scroll through the active
toolbar. See "Setup settings — adjust color and lighting",
on page 45 and "Scenes", on page 46.
To activate the front camera, select Options > Use
secondary camera.
Video capture indicators
The video viewfinder displays the following:
1 The current capture mode indicator.
2 The audio mute on indicator.
3 The active toolbar, which you can scroll through before
recording to select different items and settings (the
toolbar is not displayed during recording). See "Active
toolbar", on page 42.