Filter
Top Products
Copyright © 2007 Nokia. All rights reserved.
Personalise your device
62
In the tones list, the Download sounds link (network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a web page to download
more tones.
If you want the caller’s name to be spoken when your
device rings, select Options > Personalise, and set Say
caller's name to On. The caller’s name must be saved in
Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make
or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.
When you have activated the Offline profile, you can still
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection. See "Wireless LAN", on
page 16. You can also use Bluetooth connectivity while in
the Offline profile. See "Bluetooth connectivity", on
page 18.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
3-D tones
Press , and select Tools > 3-D tones. With 3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select Ringing
tone and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect. To
modify the effect, select from the following settings: