Filter
Top Products
1. With the back of the
device facing you, press
and hold the release
button, and lift up the
cover.
2. To release the SIM card
holder, lift the holder
up using the handle.
3. Insert the SIM card into
the card holder. Ensure
that the bevelled corner
on the card is facing
toward the slot, and that
the contact area on the
card is facing down.
4. Close the holder, and
lock it into place.
5. Insert the battery.
6. To replace the cover,
direct the bottom
locking catches toward
their slots, and press
until the cover locks into
place.
Switch the device on
1. Press and hold the power key.
2. If the device asks for a PIN
code or lock code, enter it,
and press the left selection
key. The factory setting for
the lock code is 12345.
Your device may have internal
and external antennas. As with
any radio transmitting device,
avoid touching the antenna area
unnecessarily while the antenna
is transmitting or receiving.
Contact with such an antenna
affects the communication quality and may cause the
device to operate at a higher power level than
otherwise needed and may reduce the battery life.
15
Get started