Filter
Top Products
Scenes
Scenes are only available in the main camera.
A scene helps you to find the right colour and lighting
settings for the current environment. The settings of
each scene have been set according to a certain style
or environment.
The default scene in the image mode is Auto, and in
the video mode Automatic (both indicated with
).
To change the scene, in the active toolbar, select Scene
modes and a scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select
Options > Change. In the user defined scene you can
adjust different lighting and colour settings. To copy
the settings of another scene, select Based on scene
mode and the desired scene. To save the changes and
return to the scenes list, press Back. To activate your
own scene, scroll to User defined, press the scroll key,
and select Select.
Capture images in a sequence
The sequence mode is available only in the main
camera.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar,
select Sequence mode.
To start capturing images in a quick sequence,
selectBurst, and press and hold the capture key. The
device captures images until you release the key or
until the memory runs out. If you press the capture key
briefly, the device captures six image in a sequence.
To capture two or more images in defined intervals,
select the desired time interval. To capture the images,
press the capture key. To stop capturing images, select
Cancel. The number of images taken depends on the
available memory.
The captured images are shown in a grid on the display.
To view an image, press the scroll key. If you used a
time interval, only the last captured image is shown on
the display. You can view the other images in the
Photos application.
You can also use the sequence mode with the self-
timer.
To return to the sequence mode viewfinder, press the
capture key.
To switch off the sequence mode, in the active toolbar,
select Sequence mode > Single shot.
You in the picture—self-timer
The self-timer is available only in the main camera. Use
the self-timer to delay the capture so that you can
include yourself in the picture.
66
Camera