Filter
Top Products
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use video
sharing. Ask your service provider for the SIP profile settings,
and save them to your device. Your service provider may send
you the settings or give you a list of the needed parameters.
To add a SIP address to a contact:
1 Select Menu > Contacts.
2 Open the contact or create a new contact.
3 Select Options > Edit.
4 Select Options > Add detail > Share video.
5 Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
If you do not know the SIP address for the contact, you
can use the phone number of the recipient, including the
country code, to share video (if supported by the network
service provider).
UMTS connection settings
To set up your UMTS connection:
• Contact your service provider to establish an agreement
for you to use the UMTS network.
• Ensure that the UMTS access point connection settings for
your device are configured properly. For more
information about the settings, contact your service
provider.
Share live video or video clips
During an active voice call, select Options > Share video.
1 To share live video during the call, select Live video.
To share a video clip, select Video clip. A list of video clips
saved in the device memory, the mass memory, or a
memory card (if available) opens. Select the clip you want
to share.
You may need to convert the video clip into a suitable
format to be able to share it. If your device notifies you
that the video clip must be converted, select OK. Your
device must have a video editor for the conversion to
work.
2 If the recipient has several SIP addresses or phone
numbers including the country code saved in Contacts,
select the desired address or number. If the SIP address
or phone number of the recipient is not available, enter
the address or number of the recipient including the
country code, and select OK to send the invitation. Your
device sends the invitation to the SIP address.
Sharing begins automatically when the recipient accepts
the invitation.
Options during video sharing
or to mute or unmute the microphone
or to switch the loudspeaker on and off
or to pause and resume video sharing
to switch to full screen mode (available for
receiver only)
© 2009 Nokia. All rights reserved.42