Filter
Top Products
—
Activate the self-timer (images only).
—
Activate sequence mode (images only).
—
Open Photos.
—
Select a colour effect.
—
Adjust the white balance. Select the current
lighting conditions. This allows the camera to
reproduce colours more accurately.
—
Adjust the exposure compensation (images
only). If you are shooting a dark subject against
a very light background, such as snow, adjust the
exposure to +1 or +2 to compensate for the
background brightness. For light subjects
against a dark background, use -1 or -2.
—
Adjust light sensitivity (images only). Increase
the light sensitivity in low light conditions to
avoid too dark images and blurry images.
Increasing the light sensitivity may also increase
the image noise.
—
Adjust contrast (images only). Adjust the
difference between the lightest and darkest
parts of the image.
—
Adjust sharpness (images only).
The screen display changes to match the settings you define.
Saving the captured image may take longer if you change the
zoom, lighting, or colour settings.
The capture settings are shooting-mode specific. Switching
between the modes does not reset the defined settings.
If you select a new scene, the capture settings are replaced
by the selected scene. You can change the capture settings
after selecting a scene if needed.
Capture images
When capturing an image, note the following:
• Use both hands to keep the camera still.
• The quality of a digitally zoomed image is lower than that
of a non-zoomed image.
• The camera goes into battery saving mode if there are no
actions for about a minute. To continue capturing
images, select Continue.
• Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
To capture an image with the main camera, do the following:
1 To switch from video mode to image mode, if necessary,
select
> .
2 To capture an image, press the capture key. Do not move
the device before the image is saved and the final image
displayed.
Capture images with secondary camera
To capture an image, select
. Do not move the device
before the image is saved and the final image displayed.
© 2009 Nokia. All rights reserved. 93