Filter
Top Products
2 Select the device, and enter the passcode. The same
passcode must be entered on the other device, as well.
3 Some audio accessories connect automatically to your
device after pairing. Otherwise, to connect to an
accessory, select Options > Connect to audio device.
Paired devices are indicated by
in the device search.
To set a device as authorised or unauthorised, select from the
following:
Set as authorised — Connections between your device and
the authorised device can be made without your knowledge.
You will not be asked for authorisation or acceptance
separately. Use this status only for your own devices, such as
your compatible headset or PC, or devices that belong to
someone you trust.
indicates authorised devices in the
paired devices view.
Set as unauthorised — Connection requests from this
device must be accepted separately every time.
To cancel a pairing with a device, select Options > Delete.
To cancel all pairings, select Options > Delete all.
Receive data using Bluetooth connectivity
When you receive data using Bluetooth connectivity, a tone
sounds, and the device asks you if you want to accept the
message. If you accept,
is displayed, and you can find an
informative message about the data in the Inbox folder in
Messaging. The received data is automatically saved to the
device memory. Messages received using Bluetooth
connectivity are indicated with
.
Block devices
Select Menu > Settings and Connectivity > Bluetooth.
To block a device from establishing a Bluetooth connection
to your device, open the Paired devices tab.
Tap a device you want to block, if it is not already highlighted,
and select Options > Block.
To unblock a device, open the Blocked devices tab, tap a
device, if it is not already highlighted, and select Options >
Delete.
To unblock all blocked devices, select Options > Delete all.
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests from
this device. If you accept the query, the remote device is
added to the list of blocked devices.
Remote SIM mode
Select Menu > Settings and Connectivity > Bluetooth.
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode, and set
the other device as authorised.
© 2009 Nokia. All rights reserved.72