Nokia 3585i Cell Phone User Manual


 
Wireless modem setup
[ 24 ]
10
10 Wireless modem setup
Important: Your Nokia 3585i phone can function as a wireless modem only if your service provider’s network supports
1XRTT or circuit-switched data (CSD) digital data and fax services. A subscription to these services may also be necessary.
Please check with your service provider for more details.
Your phone can function as a wireless modem when connected to your PC. Once your phone is installed and configured properly,
your phone works in conjunction with your existing data and fax software, allowing you to connect to a corporate network, the
Internet, or check e-mail wherever you are.
LEARN ABOUT DIGITAL DATA
Circuit switched data (CSD)
Until now, your only wireless data option has been your service provider’s CSD network. Using CSD, you create a virtual circuit
between your phone (as a wireless modem) and your Internet service provider (ISP), corporate network, or a fax machine.
As long as a digital data or fax call is active, you are typically being billed for the air time (whether you are transmitting/receiving
data or not). The fastest CSD data rate available is 14.4 kilobits per second (kb/s).
Quick net nonnect (QNC)
A quick net connect (QNC) digital data call allows you to connect to the Internet more quickly than a traditional CSD call. This is
achieved because your wireless service provider supplies the local connection to the Internet (instead of your local ISP dial-up
number).
Like CSD calls, you are typically being billed for the air time (whether you are transmitting/receiving data or not). The fastest QNC
data rate available is 14.4 Kbps.
1XRTT/3G packet data
Your Nokia phone is the first in a new generation of phones to take advantage of a new higher-speed data protocol called 1XRTT
(1X). The benefits to you include:
Higher data transfer rates—data rates up to 153.6 kb/s over the wireless network.
Data on-demand—data transferred only when requested;billing typically based on the amount of data you transfer.
1X packet data services work much the same way as a PC connected to a corporate network. Information is sent in bursts or packets
only when there is a request for information. Otherwise, the PC or phone remains in an idle state.
Internet access using your wireless service provider
Your wireless phone service provider now becomes your Internet service provider when you use your phone as a wireless modem
and use 1XRTT packet data or QNC. You no longer have to configure your laptop computer or handheld device for connection to
your normal ISP when you want to browse the Web or check your e-mail.
Access corporate network and e-mail using a VPN
Virtual private network (VPN) services provide an encrypted communications tunnel through the Internet, creating a secure
connection between your PC and corporate networks using a high-speed or broadband Internet connection.
If you plan on using 2G or 3G packet data services to access your corporate network e-mail system, Intranet, or LAN, your corporate
network must have VPN services available. In addition, your network administrator must grant you permission to access the
corporate network through the VPN.
Additional software on your PC (or modification of your PC network settings) may also be required. For more information on VPN
services, please contact your network administrator.
Important: Some ISPs may not permit access to certain services from Internet connections outside of your ISP domain, for
example checking or sending e-mail and newsgroup access. Therefore you may not be able to use 2G or 3G packet data in
conjunction with some of your home ISP services. Please contact your ISP for more information on accessing their services
from outside their domain.
Determine type of data services to use
Your phone supports all of data services listed above. There are times when it may be advantageous or appropriate to use one type
of data service over another.