Filter
Top Products
Data and fax software setup
[ 31 ]
11
Create a new connection
Begin with the instructions for creating a Dial-up Networking connection for a 1XRTT data call. Depending on your computer
operating system, see “Create a new connection (Windows 98/ME)” on page 28, “Create a new connection (Windows 2000)” on
page 28, or “Create a new connection (Windows XP)” on page 29.
To complete the process:
1 Enter the phone number for your local ISP or corporate network.
2 Complete the Dial-up Networking Wizard, then click Finish to save the new configuration in your Dial-up Networking folder.
3 Configure any necessary network parameters for this connection prior to dialing (IP address of DNS or WINS, etc.) by clicking
the Properties button.
You can also right-click the new Dial-up Networking icon, then click Properties.
Note: For more information on configuring your network connection, please consult your Internet service provider or your
company help desk.
Connect to the network
1 Double-click the new connection (for example, Internet-Nokia CSD).
2 Enter your user name and password, then click Connect
.
3 Your phone displays Connecting... while establishing a connection.
Once a successful connection has been made, Data call appears on the phone screen. Your Windows operating system displays its
normal series of messages while the connection is being established and verified.
• CONFIGURE AOL FOR CSD
Your AOL software can be configured to use your phone as a wireless modem for a CSD digital data call. Windows 98/ME users,
continue with the instructions to follow. Windows 2000/XP user, skip to “Modify AOL Locations” on page 32.
Modem setup (windows 98/ME)
To add your Nokia phone as a new modem to the AOL connection setup:
1 From the Sign On screen, click SETUP.
2 Click Expert Setup, then click the Devices tab.
3 Click the Expert Add button.
4 Verify that Modem (telephone line connection) is selected as the type of connection device you want to add, then click Next.
5 Select the generic modem option (for example, Standard (Hayes Compatible)) from the list of modems.
6 Select the COM port assigned to the DKU-5 data cable.
7 Set the port speed to 14400 bps, then click OK.