Filter
Top Products
Copyright © 2007 Nokia. All rights reserved.
Tools
106
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network service provider.
Access points
You may receive access point settings in a message from
a service provider. See "Data and settings" on page 40.
Some or all access points may be preset for your device by
your service provider, and you may not be able to change,
create, edit, or remove them. indicates a protected
access point.
indicates a packet data access point, and a
wireless LAN access point.
Tip! To create an internet access point in a wireless
LAN, press , and select Connect. > Conn. mgr. >
Availab. WLAN > Options > Define access point.
To create a new access point, select Options > New
access point. Select Use default settings to use the
default access point settings, or Use existing settings to
select an existing access point as the basis for the new
access point.
To edit the settings of an access point, select Options >
Edit. Follow the instructions from your service provider
Connection name — Enter a descriptive name for the
connection.
Data bearer — Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Follow the instructions from your service provider.
Access point name — You obtain the access point name
from your service provider.
User name — The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password — If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password — A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication — Select Normal or Secure.
Homepage — Depending on the access point you are
setting up, enter the web address or the address of the
multimedia messaging center.