Nokia RM-320 Cell Phone User Manual


 
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
Default profile — Set the profile that you want
activated each time you connect a certain
compatible enhancement to your device.
Automatic answer — Select whether you want
the device to answer an incoming call
automatically after 5 seconds. If the ringing type
is set to Beep once or Silent, automatic answer
is disabled.
Lights — Set whether lights remain on or are
switched off after the time-out. This setting is not
available for all enhancements.
TV-out settings
To change the settings for a TV-out connection,
select TV-Out and from the following:
Default profile — Set the profile that you want
activated each time you connect a Nokia Video
Connectivity Cable to your device.
TV screen size — Select the aspect ratio of the
TV: Normal or Widescreen for widescreen TVs.
TV system — Select the analogue video signal
system that is compatible with your TV.
Flicker filter — To improve image quality on the
screen of your TV, select On. The flicker filter may
not diminish image flicker on all TV screens.
Security settings
Phone and SIM
Press , and select Tools > Settings >
General > Security > Phone and SIM card.
PIN code request — When active, the code is
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
PIN code, PIN2 code, and Lock code — You can
change the lock code, PIN code, and PIN2 code.
These codes can only include the numbers from
0 to 9.
If you forget the PIN or the PIN2 code, contact
your service provider. If you forget the lock code,
contact a Nokia Care point or your service
provider.
See "Access codes", p. 15.
Avoid using access codes similar to the
emergency numbers to prevent accidental
dialling of the emergency number.
149
Settings
© 2008 Nokia. All rights reserved.