Filter
Top Products
Settings
42
Using GAP-standard compliance
The GAP standard guarantees that all models of DECT GAP handsets and base stations comply with a
minimum operating standard.
Your ONIS 200 HANDSET and BASE STATION comply with this standard.
Configuring line settings
Dial mode
This function allows you to choose the dial mode:“Tone” or “Pulse” (decadic dialling).
If you intend to connect your extension through a PABX, you can change the following two parameters.
The registration code is indicated
on the label underneath
the base station (RC...).
● To use your ONIS 200 HANDSET with a
GAP-standard base station that is a different
model, first follow the procedure described in
the manufacturer's operating instructions, then
continue from step of the procedure used
to add an ONIS 200 HANDSET described on
page 41.
● To add another handset model to your ONIS
200 BASE STATION, switch the ONIS 200
BASE STATION off and on, then follow the pro-
cedure described in the manufacturer's instruc-
tions.
2
L NOTE:
Minimum functions available to ONIS 200 HANDSETS and/or BASE STATIONS registered with different-model handsets and
base stations are: obtaining a line, receiving a call and dialling.
Go to “Dial mode” under the “Line settings”
in the “Settings” menu and select
OK|.
Scroll to select the dial mode you want and
select
OK|.
2
1
√ Tone
BACK OK
Dial mode:
Reglages 19/04/01 14:44 Page 42