Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
18 1725-36030-001_B.doc
Push-to-talk (PTT) mode
The SpectraLink 8030 Wireless Telephone utilizes channels for
incoming and outgoing radio communication. PTT is enabled by the
system administrator and may be activated or deactivated by the user
in the
Config menu. While PTT is active, the handset is in PTT mode. It
can receive regular phone calls in this mode. When a regular phone
call is answered, the handset enters active mode.
Messaging mode
Messaging mode is activated by the system administrator. If text
messaging functions have been programmed, as in a nurse call
system, the handset is able to receive text messages. While these
messages are being accessed, the handset is in messaging mode.
Incoming calls will ring with the second call ringing sound.
Notes on Battery Packs
• Battery Pack life will vary depending on handset model and
features and system infrastructure.
• Maximum Battery Pack performance is achieved after a few
charge/discharge cycles.
• If multiple Battery Packs are supplied with your handset, Polycom
recommends that each be fully charged upon receipt to prolong
battery life. Battery Packs will slowly lose charge if unused. To
maintain battery potential, charge unused Battery Packs
occasionally or alternate Battery Pack use.
• After a length of time Battery Packs will lose the ability to
maintain a charge and to perform at maximum capacity and will
need to be replaced. This is normal for all batteries.