Filter
Top Products
1725-36030-001_B.doc 43
Testing the Handsets
Verify proper registration and operation of each handset by
performing the following tests on the handset in an active wireless
area.
1. Power on the handset by pressing
END. You will see a series of
messages displayed as the handset acquires the system. The
handset should display the user extension or dashes if no
extension is programmed. Any error messages should clear.
2. Press the
START key. The extension number should clear and you
should hear dial tone. On some digital systems, depending on
how the telephone system is programmed, you may have to select
a line to get dial tone. Place a call and listen to the audio quality.
End the call by pressing the
END key.
3. Place a call to the handset and verify ring, answer, clear transmit
and clear receive audio.
4. Use the softkeys to verify all softkey programmed features on the
handset.
5. Press the
END key. Any line indicators should turn off and the
extension number display will return.
If any of these steps fails to operate as described, refer to Chapter 8
Troubleshooting for corrective action.
4