Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
20 1725-36030-001_B.doc
If an admin password has been set, the display will require its
entry before opening the Admin menu. The default password is
123456. If no password is set, the display will proceed directly
into the Admin menu.
Navigation
The navigation keys just below the softkeys are used to navigate
through and select menu options. These are referred to as
Nav▲,
Nav▼, Nav◄, Nav►, and NavOK.
Toggle options
Some menu options that have only two possibilities operate on a
toggle basis. The current setting is shown on the second row of the
display, called the info line. Press
NavOK to toggle between the
settings. For example, when
Enable PTT is the menu option, PTT Disabled
will show on the info line. If you select
Enable PTT, PTT Enabled will
show on the info line and the menu option will toggle to
Disable PTT.
Data entry and editing
An asterisk (*) next to an option on the display indicates that it is
selected. Use the Nav keys and the softkeys to navigate and select
desired options.
Enter numbers by pressing the buttons on the keypad. The blinking
underscore identifies the current cursor position. When entering
alphanumeric strings, the
CAPS/caps softkey will appear and may be
pressed to toggle the case. Enter letters by repeatedly pressing the
corresponding key until the desired letter displays on the screen. Use
the
CAPS softkey to change the case as needed.
To edit during entry, delete the character to the left of the cursor by
pressing the
Del softkey. To replace an entry, delete it by pressing the