Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
52 1725-36030-001_B.doc
Syslog Mode
A syslog server must be present on the network in order for the
handset to send the log messages and have them saved. The syslog
server will be found with DHCP option 7 if the handset is using
DHCP. If static addresses are configured, the syslog server’s IP
address can be configured statically in the Admin menu.
If the syslog server address is blank (000.000.000.000 or
255.255.255.255) or the handset is using DHCP and no option 7
is received from the DHCP server, the handset will not send any
syslog messages.
Admin menu options:
• *Disabled – turns syslog off.
• Errors – causes the handset to log only events that we consider to
be an error (see below).
• Events – logs all errors plus some other interesting events (see
below).
• Full – logs all the above plus a running stream of other quality
information (see below).
The table below lists the syslog messages and which level of logging
will produce them:
Message type Errors Events Full
Failed Handoff Yes Yes Yes
Successful Handoff No Yes Yes
Security Error Yes Yes Yes
Call Start/End No Yes Yes
Audio stats No No
Yes
(every 5 secs)
Audio error threshold exceeded Yes Yes Yes
Radio stats No No
Yes
(every 5 secs)
Radio error threshold exceeded Yes Yes Yes
Error Handling Mode Yes Yes Yes