Filter
Top Products
Changing Your Settings 122
1.
At the Security sub-menu, select Erase All Entries. You’re
prompted to enter the lock code again.
2. Enter the four-digit lock code using the keypad.
Note:
The default lock code is the last four digits of your mobile phone
number.
The “Erase All Entries?” prompt appears in the display.
•
To erase all Contacts list entries, press the
Yes
soft key.
•
To keep the current Contacts list entries, press the
No
soft key.
Restriction
Restriction lets you limit the use of your phone to make outgoing
calls and/or to receive incoming calls to any numbers, to no
numbers, or to calls from/to your Contacts.
1. At the Security sub-menu, select Restriction. The
following options appear in the display:
• Outgoing
— Restrict/allow outgoing calls.
•Incoming
— Restrict/allow incoming calls.
•Contacts
— Restrict/allow all access to your Contacts list.
2. Highlight the desired Restriction and press . The
following options appear in the display:
•On
— Restrict (block) selected calls.
•Off
— No restriction on selected calls.
Note:
Default setting for all Restrictions is
Off
.
3. Select the desired setting.
NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
1. At the Phone Settings sub-menu, select NAM Selection.
The following options appear in the display:
•
NAM1
— Your service contract has one phone line.
•
NAM2
— Your service contract has two phone lines.
2. Select the desired NAM option. The phone powers itself off
and back on.
System Select
The System Select menu allows you to select the roaming
setting for your phone.
1. At the Phone Settings sub-menu, select System Select.
The following roaming options appear in the display:
•
Home Only
— Your phone is available for normal operation only
within your designated coverage area.