Filter
Top Products
Bluetooth 92
If Bluetooth is off, you are prompted to “
Turn Bluetooth
on?
”.
•
To turn Bluetooth on, press the
Yes
soft key.
•
To leave Bluetooth off, press the
No
soft key.
“
Place device you are connecting to in discoverable mode
”
appears in the display.
2. Place the Bluetooth device in discoverable mode. (For
more information, refer to the device user manual.)
3. Press . Names of the available devices appears in the
display.
4. Highlight the device you want to pair with your phone.
5. Press PAIR ( ) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
6. Enter the device passkey or PIN and press .
Note:
When pairing with another Bluetooth phone, enter whatever passkey
you wish. You must, however, enter the same passkey into the other
phone when prompted.
You are prompted to verify that you want to connect with
the device.
7. To connect with the device, press the
Yes
soft key.
To bypass connecting with the device, press the
No
soft
key.
Connecting to a Registered Bluetooth Device
1. Power on the registered device and/or move to within 30
feet of it. Your phone should automatically reconnect with
the device or prompt you to accept such a connection.
2. If the registered device does not connect automatically,
from the Registered List, select the desired device.
Note:
If you are unable to connect with the device a pop-up appears in the
display. To retry, press the Yes soft key.
Bluetooth Settings
1. At the Bluetooth menu, select Bluetooth Settings. The
following options appear in the display:
• Enable
/
Disable
— Turns Bluetooth on or off.
•Discovery Mode
— Lets other devices “see” (access) your device.
Select
On
for other devices to see your device, or
Off
for no visibility.