Filter
Top Products
33
• If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
• Only adapt digits if you regularly have problems with digit dialing. Once
adapted, digit dialing will not work as well for other people using your phone.
• Adapt Digit Dial to your voice.
Digit Dial Adaptation
To access the Adapt Digits menu, follow these steps:
1. At the idle screen, press MENU. Use the right navigation key to
highlight Settings & Tools and press .
2. Press 2 () Tools, then 1 () Voice Commands.
3. Press 2 () Voice Settings, then 3 () Digit Dialing.
4. Adapt Digits is highlighted. Press .
5. A short description of the Adapt Digits displays.
6. Read the description until you are comfortable to proceed, then press .
7. Your phone displays the first digit sequence and “Please say” plays through
the speaker followed by the four digits appearing in the display.
Wait for the beep and repeat the digits using your normal tone of voice.
8. After a moment, the phone plays back the recording and prompts “Did the
recording sound ok?” If the recording was good, say “Yes.” If you need to
re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then re-record. Repeat this step until you’re satisfied with
the recording.
9. After confirming that the recording sounds ok, repeat the recording process
with the next set of digits. After ten sets of digits, the phone indicates that
adaptation is complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to its original state.
1. At the idle screen, press MENU. Use the right navigation key to
highlight Settings & Tools and press .
2. Press 2 () Tools, then 1 () Voice Commands.
3. Press 2 () Voice Settings, then 3 () Digit Dialing.
4. Highlight 2 () Reset Digits and press . The Reset Digit
Adaptation screen displays requesting confirmation of reset.