Filter
Top Products
35
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your Contacts list.
See page 50 for information on creating a Contacts list.
1. In idle mode, press the key.
2. After a brief pause, a list of optional commands appears in the display and
the audio prompt “Say a command” plays through the earpiece.
3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.
4. “Say the name or number” plays through the earpiece or speakerphone--if
it is enabled.
5. To use Name Dialing, say the name of the contact that you want to dial.
6. The name that you said is repeated through the earpiece and your phone
dials the number.
7. If VoiceSignal is not sure of the number that you said, a list of possible
matches appears in the display.
8. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
9. The location is repeated through the earpiece and your phone dials the
number.
Send Text MSG
1. In idle mode, press the key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.
3. Say “Send Text” at a distance of 3-12 inches from the microphone.
“Say the name or number” plays through the earpiece or speakerphone.
4. Say the name exactly as it is displayed in your Contacts list, first name
followed by last name.
5. The contact name appears in the To: field. See "Creating and Sending Text
Messages" on page 61 for more information.
Send Picture
Send Picture allows you to access Picture message, you can use entries stored in
My Pictures or you can take a picture of an image using the camera.
1. In idle mode, press the key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.