Filter
Top Products
31
• Send Text Message.
• Send Video Message.
• Send Picture
• Name Lookup
• Opening Apps
• Checking Phone Status
To access the VoiceSignal Settings menu, follow these steps:
1. At the idle screen, press MENU. Use the right navigation key to
highlight Settings & Tools and press .
2. Press 2 () Tools, then 1 () Voice Commands, and
2 () Voice Settings.
3. Use the navigation keys to select the setting you want to change. The
following options are available:
• Choice Lists: If VoiceSignal is not absolutely confident that it has correctly
identified a name or number, it can display a choice list of up to three
possibilities, and prompt you to confirm the correct one. You can control when
choice lists appear by changing the Choice Lists setting to the following:
• Automatic: VoiceSignal displays a choice list when it is not confident it has
identified the correct choice from among multiple alternatives.
• Always On: When there are multiple alternatives, VoiceSignal always displays a
choice list.
• Always Off: VoiceSignal never displays a choice list. Instead, the application picks
the best from among the possible choices.
• Sensitivity: In VoiceSignal, sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize names, numbers,
or commands, and rejecting too little, which means it frequently recognizes
something even if nothing was said. When VoiceSignal rejects an utterance, it
displays a message such as “Please repeat…” or “No match found.” If you
frequently experience these messages, you might be able to get better
recognition by adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (VoiceSignal detects a wrong match), you
might be able to get better performance by adjusting the Sensitivity setting
toward Reject More.
• Digit Dialing: Use the Digit Dialing menu to adapt digit dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve voice recognition of phone
numbers. Adaptation takes about 180 seconds.
• Reset Digits: Erases any digit adaptation you have done and resets digit
recognition to the factory default. If you have not adapted digits, this option is
grayed out.