Filter
Top Products
Messages 118
•
If your network requires that you accept SSL certificates, tap the
Accept all SSL certificates
field to place a check mark in the box and
activate this additional level. Most often, this option is not required.
Confirm this information with your IT Administrator.
Important!
If your exchange server requires this feature, leaving this
field unchecked can prevent connection.
7. With the new server information entered, tap
Next
.
8. If prompted, read the on-screen Activation disclaimer and, when
prompted, tap
OK
. The device then verifies your incoming server
settings.
9. If prompted, read the
Remote security administration
information
and tap
OK
to accept the service and continue.
10. Tap
Send email from this account by default
, to make this your
default email account for outbound emails.
11. Adjust the various on-screen Account settings configuration
fields and tap
Next
. It may take a few seconds for the next
screen to load.
12. If prompted, read the
Activate device administrator?
screen and
tap
Activate
to complete the email setup process.
Note:
This process can take a few minutes. If the previous setup screen
re-appears,
ignore it and do not alter any fields
during this
process.