Filter
Top Products
The following options are also displayed by pressing .
To select an option, highlight it and press .
ᮣ
Answer to answer the call.
ᮣ
Answer:Speaker to answer the call in speakerphone mode.
ᮣ
Don’t Answer to hang up the incoming call and return to Web
while you are in the Web operation. (This feature appears
when Web access is dormant.)
ᮣ
Screen Call to answer the call by using pre-recorded
announcement. (This feature appears when you are in service
area or digital roaming area.) See page 93 for setting up.
ᮣ
Quiet Ringer to mute the ringer. (This feature appears when
the ringer is set.)
Note: If your phone is off, incoming calls go to voicemail.
3. To disconnect the call, press .
Ending a Call
With the Flip Open:
ᮣ
Close the phone or press .
With the Flip Closed:
ᮣ
Press and hold .
Note: If the setting for Close Flip is not set to “end call,” closing the phone
will not end the call. (See “Setting the Open/Close Flip Option” on page 40.)
Tip: Time/Date is displayed when you press while the phone is in use.
11
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. If your phone is off,incoming
calls go to voicemail.
2. Press or to answer an incoming call. (Depending
on your phone’s settings,you may also answer incoming calls
by opening the phone or by pressing any number key. See
“Setting Any Key Answer” on page 41 for more information.)
To answer a call with the flip closed:
1. Make sure your phone is on. (If your phone is off,incoming
calls go to voicemail.)
2. When your phone rings or vibrates, press and hold the Side
Call key ( ) on the right side of the phone. (The call will
be answered in speakerphone mode.)
– or –
ᮣ
Open the phone to use the earpiece.
Note: If the setting for Open Flip is not set to “Answer Call,” opening the
phone will not answer the call. (See “Setting the Open/Close Flip Option”
on page 40.)
Your phone notifies you of incoming calls in the following ways:
ᮣ
The phone rings or vibrates.
ᮣ
The LED flashes.
ᮣ
The backlight illuminates.
ᮣ
The screen displays an incoming call message.
ᮣ
If available, the phone number of the caller is displayed.
ᮣ
If the phone number is in your Contacts list, the contact’s
name is displayed.
10