Sanyo SCP-7300 Cell Phone User Manual


 
Turning Your Phone ON and OFF
Turning Your Phone ON
To turn your phone on, press .
Once your phone is ON, it displays “Looking for service...”
which indicates that your phone is searching for a signal. When
your phone finds a signal, it automatically enters standby mode.
At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching,a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key (when your phone is
turned ON).
Tip: The Power Save feature helps to save your battery power when you
are in an area where there is no signal.
Turning Your Phone OFF
Press for two seconds until you see the powering down
animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
5
Viewing the Display Screen
This list identifies the symbols you’ll see on your display screen.
shows your current signal strength. The more lines you
have,the stronger your signal.
means your phone cannot find a signal.
tells you a call is in progress.
indicates the 1X Services/10-4 access are available.
indicates the 1X Services/10-4 access are not available.
indicates 1X Data/10-4 access are connected, but voice
calls can be sent or received.
indicates 1X Data/10-4 access are active.
indicates you have new text messages waiting.
indicates you have new voicemail messages waiting.
Press and hold to call your voicemail box.
indicates you have text messages and voicemail messages
waiting.
indicates you are roaming on digital service network.
indicates you are roaming on analog service network.
indicates your phone is on analog service network.
indicates the 10-4 service is enabled.
indicates the 10-4 service is disabled.
shows the level of your battery charge. The more black you
see, the more power you have left. It turns while charging.
indicates you have menus to scroll (in four directions).
indicates the vibrate feature is set to ON.
indicates volume level 4 and vibrate feature is set to ON.
indicates the voice call ringer setting is OFF.
indicates all the sound settings are OFF.
indicates the Location Service of your phone is enabled.
indicates the Location Service of your phone is disabled.
indicates you have new caller’s message.
indicates the Screen Call Auto setting is ON.
indicates you have new downloaded data.
indicates your phone is in TTY mode.
indicates Headset mode is set to 10-4 and a headset is
connected.
indicates the speakerphone mode is set to ON.
4