Filter
Top Products
Redialing a 10-4 Call
1. From the 10-4 List, highlight Redial, and press and hold .
ᮣ
You will see 10-4 redialing... and Connecting... followed by the
text “You have floor.”
2. Speak after the beep (keep pressing down while you are
speaking). After speaking, release the button to allow others
to reply.
3. When you are finished, press .
Note: You can change the volume and the speaker setting while a 10-4
call is activated.
Volume: Adjust the voice volume by using the Side
Volume key or the navigation key up or down except when you are
pressing and holding . This doesn’t affect tone and beep volume.
Loudspeaker: Switch the speaker On or Off by pressing .
103
Receiving a 10-4 Call (1-to-1 Call)
1. Make sure your phone’s 10-4 mode is enabled (see “Setting
10-4 Mode” on page 96).
2. When you receive a 10-4 call from a contact, “10-4 Call,” the
contact’s name, and the 10-4 number appear on the display.
(You do not need to take any action to answer the call.)
3. If the person placing the call has kept the floor (held the 10-4
button), you will see the contact name and 10-4 number along
with “has floor.,” and you will hear the caller speaking.
4. When the caller finishes speaking and releases the 10-4
button, you will see “Floor is open.” on the display screen.
Press and hold to take the floor and reply to the caller.
(You will see “You have floor.” and hear a tone confirming that
you may speak.)
5. When the conversation is finished, press .
Receiving a 10-4 Call (Group Call)
1. When you receive a 10-4 call from one of the group members,
“Group Call,” the group member’s name, and the 10-4 number
appear on the display.
2. Continue with the 10-4 call as described on the previous page.
3. When the conversation is finished, press .
102