![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/f4/3f497b2d-6e7d-46f1-b07f-ec9427aa732c/3f497b2d-6e7d-46f1-b07f-ec9427aa732c-bg13.png)
Black 0019
Black0019
9. CONSOLE OPERATING MODES
OFF MODE
◆ Use this mode to disarm the burglary portion
of the system.
◆ Switching to Off Mode stops any alarms in
progress.
◆ The 24-hour functions are still active in Off
Mode and can be triggered by pressing the
[
FIRE
] or [
EMERGENCY
] button.
Switch to Off Mode by entering the user code,
and pressing [
OFF
].
❇
When the system is disarmed to Off Mode, the
Console will sound one “Gong”.
❇ If an alarm has occurred, multiple beeps will
sound after disarming and the sensor light for
the sensor(s) that caused the alarm will flash.
✍
NOTE: In Off Mode, protected doors and windows
cannot trigger the burglary alarm.
CHIME MODE
◆ Chime Mode is for monitoring entries and exits
without causing alarms.
◆ Use Chime Mode as an “automatic door
chime” when at home.
❇ Opening any protected door or window causes
the Console to sound a “ding-dong”.
Select the Chime Mode by entering a user
code, then press [
CHIME
].
The user can enter Chime Mode from Off
Mode by holding down the [
CHIME
] key for
two seconds.
❇
When the system is switched to the Chime
Mode, the Console will sound a “Gong” and
one “Beep”.
◆ Going to Chime Mode disarms the system and
stops any alarms in progress.
✍
NOTE: In Chime Mode, protected doors and
windows cannot trigger the burglary alarm.
START HERE
YOUR
USER
CODE
DONE
1 GONG
(OPTIONAL)
OFF
OFF MODE
START IN OFF
DONE
1 GONG
& 1 BEEP
HOLD
DOWN
CHIME
START HERE
YOUR
USER
CODE
DONE
1 GONG
& 1 BEEP
(OPTIONAL)
CHIME MODE
CHIME
17