Black 0025
Black0025
MAKING A SENSOR A 24-HOUR DOOR CHIME
◆ Sensors can be programmed to cause the
Console to chime any time they’re activated.
◆ Chime-only sensors will not be able to trigger
the alarm in any Console mode.
◆ The sensor must have already been learned
by the Console (see “Adding sensors to the
System” for details).
Start with the Console in Test Mode.
Enter the master user code then press the
[
TEST
] button.
❇ A “gong” and five “beeps” will sound.
❇ The sensor status indicators will light for each
sensor programmed into the Console.
Enter the sensor number from 01-12 (you
must enter two digits, example: 5 = 05).
❇ The sensor indicator light will flash for the
sensor number selected.
Press [
HOME
], 8, then [
AWAY
]. A “bing” tone
will sound.
Enter another sensor number or exit Setup
Mode by holding the [
OFF
] button for three
seconds.
MAKING A SENSOR INTERIOR
◆ Motion detectors are automatically
programmed as interior sensors. Any other
sensor can also be programmed as an interior
sensor.
◆ Interior sensors can only trigger an alarm
when the Console is in Away Mode.
◆ The sensor must have already been learned
by the Console (see “Adding sensors to the
System” for details).
Start with the Console in Test Mode.
Enter the master user code then press the
[
TEST
] button.
❇ A “gong” and five “beeps” will sound.
❇ The sensor status indicators will light for each
sensor programmed into the Console.
Enter the sensor number from 01-12 (you
must enter two digits, example: 5 = 05).
❇ The sensor indicator light will flash for the
sensor number selected.
Press [
HOME
], 7, then [
AWAY
]. A “bing” tone
will sound.
Enter another sensor number or exit Setup
Mode by holding the [
OFF
] button for three
seconds.
START IN TEST
MASTER
USER
CODE
1 GONG &
5 BEEPS
SENSOR
NUMBER
FOR CHIME
DONE
1 BING
TEST
HOME
AWAY
8
TUV
8 FOR
CHIME
ZONE
START IN TEST
MASTER
USER
CODE
1 GONG &
5 BEEPS
SENSOR
NUMBER
FOR
INTERIOR
DONE
1 BING
TEST
HOME
AWAY
7 FOR
INTERIOR
ZONE
7
PRS
23
