![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/f4/3f497b2d-6e7d-46f1-b07f-ec9427aa732c/3f497b2d-6e7d-46f1-b07f-ec9427aa732c-bg7.png)
Black 0007
Black0007
3. TYPICAL SYSTEM SENSORS
DOOR/WINDOW SENSOR
◆ Sensor mounts on door or window with
adjacent magnet.
◆ Opening door or window moves magnet away,
triggering sensor.
◆ Pressing the case causes sensor to send a test
signal.
◆ Jumper inside for INSTANT or DELAYED
alarm setting.
◆ Press the case for testing, the red transmit
light shows that battery is in good condition.
◆ Internal lithium batteries are monitored by the
Console.
◆ Sends hourly status reports to the Console.
◆
Up to 3 years battery life (depends on
frequency of activation). (UL tested for 1 year
minimum.)
◆ Sensor contains internal terminals for
connection to glass break detector and
external switches.
WIRELESS KEYPAD
◆ For controlling the system without having to
go to the Console.
◆ Emergency and fire alarm can be triggered
from wireless keypad at any time.
✍
UL NOTE: For personal emergency use only. Not
for use as a UL Listed Medical Alert System.
◆ Green operation light.
◆ Internal 9-volt battery is monitored by the
Console.
◆ Keypad’s beeper will buzz during
transmissions when the battery is low.
◆
Up to 3 years battery life (depends on
frequency of activation). (UL tested for 1 year
minimum.)
◆ Sends hourly status reports to the Console.
◆ Press the [(A)] key to activate the automation
output.
◆ Pressing [
∗
] clears the keypad.
◆ Holding [
∗
] for two seconds sounds the mode
beeps from the Console.
✔
Off Mode: 1 “Gong”
✔
Chime Mode: 1 “Gong” & 1 “Beep”.
✔
Home Mode: 1 “Gong” & 2 “Beeps”.
✔
Away Mode: 1 “Gong” & 3 “Beeps”.
✔
Test Mode: 1 “Bing” & 4 “Beeps”.
5